![background image](http://html1.mh-extra.com/html/escort/ix-ci-platform/ix-ci-platform_owners-manual_2426260010.webp)
16
17
Problem
Detector beeps briefly at the same
location every day, but no radar source
is in sight.
Detector did not alert when a police
car was in view.
Detector’s audible alerts become
softer after the first few alerts.
The power-on sequence reoccurs
while you are driving.
You wish to restore the factory default
settings.
The device will not turn on.
The display is blank.
Detector displays “Check FR”
Detector displays “ReplacFR”
Solution
A motion sensor or intrusion alarm is located within range of your
route. If you have AutoLearn enabled, the factory default setting,
then ESCORT iX Ci will store this signal after about 3 passes and
no longer alert to it.
Officer may not have radar or laser unit turned on.
VASCAR (Visual Average Speed Computer and Recorder), a
stopwatch method of speed detection, may be in use.
Detector is in AutoMute mode. See “AutoMute” in the Settings &
Preferences section for details.
A loose power connection can cause ESCORT iX Ci to be briefly
disconnected and will retrigger the power-on sequence. Check all
connections.
Press and hold the MRK and BRT buttons while powering on the
detector. A “Restored” message will display, acknowledging
the reset.
Check that vehicle ignition is on.
ESCORT iX Ci is in Dark mode. Press the BRT button to adjust the
brightness.
There is a communication issue with the Front Receiver (FR). The
Front Receiver’s connections and wiring should be checked. If no
connection or wiring issue is found and the message persists
there may be an issue with the component.
A critical issue has been reported from the Front Receiver (FR)
requiring it to be replaced or repaired.
Troubleshooting
Service Procedure
Service Procedure
If your ESCORT iX Ci ever needs service, please follow
these simple steps:
1 Check the troubleshooting section of this
manual. It may have a solution to your problem.
2 Contact your installing dealer. They will evaluate
your unit and arrange repairs if necessary.
3 If you installed the system yourself, or can no
longer contact your installer, contact our service
department at 1-800-543-1608.
Содержание iX Ci PLATFORM
Страница 12: ...20 Remove card along perforations 21 iX Ci...