manualshive.com logo in svg

Escort 3136A, Руководство по эксплуатации

Поделиться
Скачать
Escort 3136A Скачать руководство пользователя страница 5

Section 1 

Introduction 

1-1  Introducing the 50,000 Count Dual Display Multimeter 

 

NOTE

 

1.  This operation manual contains information and warning that must 

be followed to ensure user operation safety and to retain the meter 
safety condition. 

 

 

Precaution!

 

TO ENSURE PERSONAL SAFETY AND TO AVOID DAMAGING THE 

METER AND THE EQUIPMENT CONNECTED, READ “GETTING 

STARTED” IN SECTION 2-2 BEFORE USING THE METER.

 

 

The meter is 50,000 count 

Dual Display Multi-meter.

 The meter is designed for 

bench-top, field service, and system applications with a high 
performance/price ratio.   

With the RS-232 computer interface (standard), the meter is fully 
programmable for use on the RS-232 interface. 

 

With the IEEE-488 computer interface (optional) installed, the meter is fully 
programmable for use on IEEE-488.1 interface bus (1978). The meter is also 
designed in compliance with supplemental standard IEEE-488.2 (1987). 

 

 

1

Содержание 3136A













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды