Escort 3136A, Руководство по эксплуатации

Страница: 21 / 108

Resistance/Continuity Tests
In Ohm test, press button momentarily to set continuity function
ON. The sign will be lit and lock the range to 500
Ω
. Then
connect the test leads and across the tested circuit as shown in Figure
2-8. While testing continuity, the beeper will sound if the resistance is
less than 10
Ω
.
For other ranges, the beeper will sound if the resistance
falls below the typical values indicated in Table 2-2.
Table 2-2. Beeper Responses in Continuity Test
Measuring range Beeper On
500.00
Ω
<10
Ω
5.0000 k
Ω
<100
Ω
50.000 k
Ω
<1 k
Ω
500.00 k
Ω
<10 k
Ω
5.0000 M
Ω
<100 k
Ω
50.000 M
Ω
<1 M
Ω
POWER
WARNING!
To avoid damaging to the meter, do not apply a voltage
exceeding 500 V peak between the input terminals.
Figure 2-8.
Ω
/Continuity Test
17