ESCO Technologies ETS-LINDGREN SuiteSentry, Руководство по эксплуатации и установке

Страница: 7 / 34

Page 7 of 34
2.0 PRE ‐ INSTALLATION CHECKLIST
2.1 Product Identification and Shipping List
The SuiteSentry Single Screener hardware is shipped in one corrugated carton. This long carton
contains all the items required for assembly and installation of the SuiteSentry Single Screener
System. The contents are listed below.
Component Qty P/N
SuiteSentry Single Screener
- Sensor Array Column Assembly 1 400151
Power Supply - Digital w/ 12’ output cable / connector 1 9910-A-01427-C
AC mains power cord – w/ 90° Plug - 3 ft long -- USA 1 6608-A-01497-A
Installation Hardware Kit - SuiteSentry Single Screener 1 9993-A-02760-A
Surface Conduit Accessory Kit – Ivory – SuiteSentry Single Screener 1 9993-A-02041-B
Document Package – SuiteSentry Single Screener 1 0550-A-02016-D
Spacer, Mounting Block Extension 2 2973-A-02778
Mat, Floor, Solo Instructive 1 0540-A-02050
Box, Return Materials, 14” x 8” x 5” (w/ UPS Return Label) 1 2840-A-02838
2.2 Tools Required for Assembly and Installation
1. #2 Phillips screwdriver 6 inches long (15 cm)
2. Box cutting knife with replacement blades
1. Medium duty electric or battery drill with at least 2 spare charged batteries
2. 1/4 inch nut driver/1/4 inch wrench (ratcheting wrench is best)
3. 3/8 inch nut driver/3/8 inch wrench (ratcheting wrench is best)
4. Drill bit index with at least two (2) 1/8 inch drill bits and ½ inch bit for wall togglers
5. Measuring tape up to 12 feet (4 meters)
6. Micro screwdrivers, flat head and Phillips
7. 6 inch (15 cm) bubble level
8. Heavy Duty PVC cutters for wire trim moldings
(Sears 3-1 Accu-Cut Model 37310 recommended)
9. Painter’s tape (for detector) and clear packing tape (for parts return box)