Detail J
Detail K
5
40
40
18.
Repeat steps
5
through
17
for other
table top assembly.
Second
Table Top
Half does not get Nut Plates (#47),
skip step 12 on the Second Table Half.
17.
Lay Corner Caps (#40) on table as shown in
Figure 11
.
Secure to bottom of table with three Screws (#5). See
Detail K & Detail J
.
16.
Line up holes in Storage Tray with Indentations in table
top and attach it to the bottom of the table with four
(#5) screws as shown in
Figure 11
and
Detail L
.
NOTE:
Prepare an area for the assembly of the second table top
half. If necessary, move the first table top half aside with the aid of a
helper. Be sure to place it in a location where it won't be disturbed
or damaged. If setting on its side, be sure to place the bottom edge
no less than 12 inches away form the wall. Also be sure to place
carpet or pieces of the shipping carton down to protect
table top edges. If floor is not carpeted, brace table
top half with a heavy object to keep it from sliding.
*NOTE: Legs not
shown for clarity
.
7
Detail L
11
Figure
5
HARDWARE NEEDED
#8 X 9/16 Screw
(Qty. 10)
14
