5
47
Detail G1
Flush
Flush
No screw in
this hole
47
Detail G2
No screw in
this hole
19
29
20
34
44
23
38
25
Detail F
Leg Brace
24- Right Hand
Leg Assembly
19- Left Hand
Leg Assembly
26
*NOTE: Hinges not Shown
for clarity.
9
Figure
5
HARDWARE NEEDED
#8 X 9/16 Screw
(Qty. 6)
1/4-20 X 2 3/4 Hex Head Bolt
29
(Qty. 2)
1/4"
Plastic
Washer
(Qty. 4)
38
34
1/4-20 Nyloc Locknut
(Qty. 2)
23
#10-24 X 1/2 Phillips
Pan Head Screw
(Qty. 2)
44
#10-24
Locknut
(Qty. 2)
12.
Attach legs (#19 & 24) to table top with Hex Bolt (#29), two Plastic Washers (#38)
and Locknut (#34). Attach leg brace to Leg Mounting Bracket (#25) with Phillips
Head Screw (#23) and #10-24 Locknut (#44) as shown in
Detail F
. Attach leg
levelers (#26) to bottom of the legs (#19 & 24) as shown in
Figure 9
.
13.
Attach Net Plate (#47) as shown in
Detail G1
&
Detail G2
. Make sure
the
Nut Plate is flush
with the corner of the table and make sure to
use
the top three holes
in the nut plates.
Note: Nut Plates Mount to one
Table Top Only.
Note:
There are no Indentations guides for
the nut plates on the table top.
12
