Esaote MyLab 9VET, Начало работы

Страница: 54 / 116

P R E P A R I N G T H E S Y S T E M
MyLab
- G E T T I N G S T A R T E D 4 - 8
External CD/DVD and HDD drives
Any external USB CD/DVD drive and/or USB hard disk drive have to be
connected to
MyLab
USB ports both for data transfer and power. For safety
reasons, the drive must be fixed to
MyLab
console. Mechanical damage may
occur if the drive falls down.
The External Slim DVD Writer kit supplied by Esaote includes a Velcro tape
to easily and securely fix it to
MyLab
console. Stick the tape both on the
MyLab
console and on the DVD case, then attach them to fix the External Slim
DVD Writer to
MyLab
console. Power the External Slim DVD Writer
through two USB ports using the split cable present on the kit.
WARNING
The maximum current supplied by the
MyLab
USB ports is 500mA (for USB
2.0) and 1A (for USB 3.0). Peripherals exceeding this limit can be connected
only if powered by their external power supply through a medical insulation
transformer.
Moving and Transporting the System
MyLab
is provided with wheels and handle to allow the user to easily move the
device. The following precautions must be observed:
Moving the system 1. Switch the system off.
2. Engage the wheel brakes by pressing the pedals fully down.
3. Push in the QWERTY keyboard completely beneath the
Control Panel.
4. Use the handle lever to center the control panel and move it
to a comfortable height for moving.
5. Turn the mains switch off and unplug the power cord,
wrapping it on the rear hook to ensure it.
6. Disconnect all external cables, including network and
external devices.
7. Secure all cables, probes and accessories so that they do not
interfere with the wheels.
8. Peripheral can be placed on the
MyLab
peripheral platform,
provided that it is secured with the locking belt.
9. If peripherals are placed on an external additional platform,
be sure they are disconnected from
MyLab
before moving the
ultrasound system.