ESAB OrigoMag C140, Инструкция по эксплуатации

Страница: 9 / 15

− 9 −
OC140e
6.1 Connection and control devices
1 Welding voltage switch
OFF + 4 steps (mains ON/OFF)
4 Return cable with clamp, fixed
2 Orange indicating lamp, overheating 5 Knob for wire speed setting
3 Welding gun, fixed
6.2 Functions explanation
6.2.1 Overheating protection
If the internal temperature becomes too high, the welding is interrupted and disabled.
This state is indicated by lighting of the orange indicating lamp [2] on the front of the ma-
chine. It resets automatically when the temperature has fallen.
7 MAINTENANCE
Regular maintenance is important for safe, reliable operation.
Note!
All guarantee undertakings from the supplier cease to apply if the customer himself
attempts any work in the product during the guarantee period in order to rectify any
faults.
7.1 Inspection and cleaning
Check regularly that the power source is free from dirt.
The power source should be regularly blown clean using dry compressed air at reduced
pressure. More frequently in dirty environments. Otherwise the air inlet/outlet may be-
come blocked and cause overheating.
GB