ESAB OrigoMag C140, Инструкция по эксплуатации

Страница: 5 / 15

− 5 −
OC140e
3 INTRODUCTION
OrigoMag C140 are step controlled power sources in a compact design, intended for welding with
solid steel, stainless steel or tubular wire with or without shielding gas.The possibility of welding with
homogeneous wire/shielding gas and welding with gasless tubular wire is obtained by switching the +
and − connections on the switching terminal by the wire feed unit.
ESAB’s accessories for the product can be found on page 14.
3.1 Equipment
The power source is supplied with:
S Welding gun
S Return cable with return clamp
S Instruction manual
4 TECHNICAL DATA
OrigoMag C140
Voltage 230V, 1
∼
50/60Hz
Permissible load at
100% duty cycle 42A
60 % duty cycle 54A
20 % duty cycle 100A
Setting range (DC) 35A − 130A
Open circuit voltage 20 − 28V
Open circuit power 90W
Power factor at max load 0,92
Control voltage 230V, 50/60Hz
Wire feed speed 2,0 − 14m/min
Welding gun connection fixed
Wire dimension range 0,6 − 0,8(Fe)
0,8(cored)
0,8(CuSi)
Max diameter/weight
of wire bobin
200mm/5kg
Dimensions lxwxh 650x300x550
Weight 25kg
Operating temperature − 10 ÷ +40
o
C
Enclosure class IP 23
Application classification
Duty cycle
The duty cycle refers to the time as a percentage of a ten − minute period that you can weld at a cer-
tain load without overloading.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
GB