ESAB Origo Mig C420 PRO, Инструкция по эксплуатации

Страница: 8 / 30

3 TECHNICAL DATA
0463 272 001
- 8 -
© ESAB AB 2017
3 TECHNICAL DATA
Mig C420 PRO
Voltage 400 - 415 V, 3~ 50 Hz
Permissible load
at 100% duty cycle 315 A/30 V
at 60% duty cycle 400 A/34 V
at 50% duty cycle 420 A/35 V
Setting range (DC) 50 A/16.5 V - 420 A/35 V
Open circuit voltage 14 - 47 V
Open circuit power 520 W
with cooling unit 730 W
Efficiency 77%
Power factor 0.92
Control voltage 42 V, 50/60 Hz
Wire feed speed 1.9 - 25.0 m/min
Burnback time 0 - 0.5 s
Creep start OFF / ON
2/4 stroke 2 / 4
Welding torch connection EURO
Max diameter of wire bobbin 300 mm
Wire dimension range 0.6 - 1.6 mm
Dimensions LxWxH 935 x 640 x 800 mm
Weight 215 kg
with cooling unit 230 kg
Operating temperature -10 to +40 °C
Transportation temperature -20 to +55 °C
Enclosure class IP 23
Application class
Cooling unit (100 % duty cycle)
P
1l/min
1200 W at 25 °C
p
max
3.5 bar
Coolant ESAB's ready mixed coolant
Coolant quantity 5.5 l
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading. The duty cycle is valid for 40 °C / 104 °F, or below.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP23 is intended for indoor and outdoor use.