ESAB Origo Mig C420 PRO, Инструкция по эксплуатации

Страница: 7 / 30

2 INTRODUCTION
0463 272 001
- 7 -
© ESAB AB 2017
2 INTRODUCTION
The Mig C420 PRO is a step-controlled compact welding power source incorporating wire
feed mechanism intended for MIG/MAG welding with solid wires of steel, stainless steel or
aluminium, and cored wires with or without shielding gas.
The Mig C420w PRO is equipped with a cooling liquid system for welding torches. The Mig
C420 PRO is not equipped with a cooling system and can operate only with appropriate gas
cooled torches.
The power units are fan-cooled and equipped with thermal overload protection.
The power sources can be fitted with a flow guard (Mig C420w PRO).
The power source comes in different variants, see "ORDERING NUMBERS" chapter.
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of
this manual.
2.1 Equipment
The power source is supplied with:
• Welding torch PSF 405/410w - 4.5 m
• Return cable 5 m with return clamp
• Shelf for gas cylinder
• Instruction manual