ESAB EMP 285ic 1ph, Инструкция по эксплуатации, Страница: 37 / 78

5 OPERATION
0463 618 001 - 37 - © ESAB AB 2019
3. On the wire-feed assembly release the tensioning arm by pulling it up out of its detent
and rotating it toward you (see (1) in Figure 9).
Figure 9. Wire-feed mechanism
1. Tension knob 5. Center wire-feed guide
2. Tensioning arm 6. Input wire-feed guide
3. Wire to torch 7. Wire in
4. Output wire-feed guide
4. If wire remains in the torch assembly:
Near the input end of the wire-feed guide on the wire-feed assembly (see Figure 9) cut
the wire while holding the bobbin-end (so the wire does not unravel from the bobbin
after cutting it loose). Secure the cut end of the wire to the bobbin (if any wire is left on
the bobbin) to prevent the wire from unraveling from the bobbin.