ESAB Caddy Arc 152i, Инструкция по эксплуатации

Страница: 8 / 28

© ESAB AB 2008
- 8 -
bh31d1e
5 OPERATION
General safety regulations for handling the equipment can be found on
page
4 . Read through before you start using the equipment!
5.1 Connections and control devices
1 Connection (+)
MMA: for return cable or welding cable
TIG: for return cable
4 Toggle switch for mains power supply 0 / 1
2 Control panel, see under 5.2 5 Mains cable
3 Connection (-)
MMA: connection for return cable
TIG: connection for Tig torch
5.2 Control panel A31
Knob for setting the current
Mains voltage LED (green)
Thermal overload trip indicator
(yellow)
5.3 Connection of welding and return cable
The power source has two outputs, a positive terminal and a negative terminal, for
connecting welding and return cables. The output to which the welding cable is
connected depends on the type of electrode used. The connecting polarity is stated
on the electrode packaging. Connect the welding cable to the terminal stated on the
electrode packaging.
Connect the return cable to the other output on the power source. Secure the return
cable's contact clamp to the work piece and ensure that there is good contact
between the work piece and the output for the return cable on the power source.
GB