background image

CutSkill 60

OPERATING MANUAL

CIGWELD - LIMITED WARRANTY TERMS

LIMITED WARRANTY: CIGWELD Pty Ltd, An ESAB Brand, hereafter, “CIGWELD” warrants to customers of its autho

-

rized distributors hereafter “Purchaser” that its products will be free of defects in workmanship or material. Should 

any failure to conform to this warranty appear within the time period applicable to the CIGWELD products as stated 
below, CIGWELD shall, upon notification thereof and substantiation that the product has been stored, installed, oper-
ated, and maintained in accordance with CIGWELD’s specifications, instructions, recommendations and recognized 
standard industry practice, and not subject to misuse, repair, neglect, alteration, or accident, correct such defects 
by suitable repair or replacement, at CIGWELD’s sole option, of any components or parts of the product determined 
by CIGWELD to be defective.

CIGWELD MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED. THIS WARRANTY IS EXCLUSIVE AND IN LIEU 

OF ALL OTHERS, INCLUDING, BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR 
ANY PARTICULAR PURPOSE.

LIMITATION OF LIABILITY: CIGWELD SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL, INDI-
RECT OR CONSEQUENTIAL DAMAGES, SUCH AS, BUT NOT LIMITED TO, LOST PROFITS AND BUSINESS INTER-
RUPTION. The remedies of the Purchaser set forth herein are exclusive and the liability of CIGWELD with respect 
to any contract, or anything done in connection therewith such as the performance or breach thereof, or from the 
manufacture, sale, delivery, resale, or use of any goods covered by or furnished by CIGWELD whether arising out of 
contract, negligence, strict tort, or under any warranty, or otherwise, shall not, except as expressly provided herein, 
exceed the price of the goods upon which such liability is based. No employee, agent, or representative of CIGWELD 
is authorized to change this warranty in any way or grant any other warranty.

PURCHASER’S RIGHTS UNDER THIS WARRANTY ARE VOID IF REPLACEMENT PARTS OR ACCESSORIES ARE 
USED WHICH IN CIGWELD’S SOLE JUDGEMENT MAY IMPAIR THE SAFETY OR PERFORMANCE OF ANY CIGWELD 
PRODUCT. PURCHASER’S RIGHTS UNDER THIS WARRANTY ARE VOID IF THE PRODUCT IS SOLD TO PURCHASER 
BY NON-AUTHORIZED PERSONS. 

The warranty is effective for the time stated below beginning on the date that the authorized distributor delivers the 
products to the Purchaser. Notwithstanding the foregoing, in no event shall the warranty period extend more than 
the time stated plus one year from the date CIGWELD delivered the product to the authorized distributor.

Any claim under this warranty must be made within the warranty period which commences on the date of purchase 
of the product.  To make a claim under the warranty, take the product (with proof of purchase from a Cigweld Ac-
credited Seller) to the store where you purchased the product or contact Cigweld Customer Care 1300 654 674 for 
advice on your nearest Service Provider. CIGWELD reserves the right to request documented evidence of date of 
purchase. CIGWELD or our Accredited Distributor must be notified in writing of its claim within seven (7) days of 
becoming aware of the basis thereof, and at its own expense returning the goods which are the subject of the claim 
to CIGWELD or nominated Accredited Distributor/Accredited Service Provider

This warranty is given.

Cigweld Pty Ltd

A.B.N. 56007226815

71 Gower Street, Preston

Victoria, Australia, 3072

Phone: 1300 654 674

Email: [email protected]

Website: www.cigweld.com.au

This warranty is provided in addition to other rights and remedies you have under law:  Our goods come with guar-
antees which cannot be excluded under the Australian Consumer Law.  You are entitled to replacement or refund 
for a major failure and to compensation for other reasonably foreseeable loss or damage.  You are also entitled to 
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to 
a major failure. 

Please note that the information detailed in this statement supersedes any prior published data produced by CIGWELD.

Содержание 1-1601-60



















































Отзывы: