Page 18
ERVOR (SCA) - 6, Rue Désiré Granet - Z.I. du Val d'Argent - 95100 ARGENTEUIL FRANCE
(33) 01 34 11 50 00
(33) 01 34 11 50 10
Web : www.ervor.com - Email : [email protected]
Manual G06
Edition: 10/2015 - rev A
Ervor Type
AC2
couplings
allow a maximum linear misalignment of up to 0°30' between the
compressor and the drive motor in all directions.
Recommendations for assembly :
)
Fit the short hub coupling plate on the end of the compressor drive shaft.
)
Fit the long hub coupling plate on the end of the motor drive shaft.
)
Mount the drive motor onto the common frame.
)
Assemble the semi-elastic blades between the intermediate plate and the plate on the motor
drive side as shown below.
)
Align the compressor and motor by adjusting the coupling according to the measurements
indicated in the illustration below; hand tighten.
)
Check setting dimensions, adjust if necessary and tighten fixings.
Содержание G06
Страница 37: ......
