manualshive.com logo in svg

ERVOR G06, Руководство по эксплуатации и техническому обслуживанию, Страница: 7 / 49

Поделиться
Скачать
ERVOR G06 Скачать руководство пользователя страница 7

Page 7

Manual G06
Edition: 10/2015 - rev A

ERVOR (SCA) - 6, Rue Désiré Granet - Z.I. du Val d'Argent - 95100 ARGENTEUIL FRANCE

 (33) 01 34 11 50 00 

 (33) 01 34 11 50 10

Web : www.ervor.com - Email : [email protected]

AIR COMPRESSOR
EXCLUSIVELY NON BREATHABLE AIR

!

IN THE CASE OF PURCHASE OF ONLY A COMPRESSOR HEAD, THE
CUSTOMER MUST EQUIP THE COMPRESSOR WITH A CALIBRATED
SAFETY VALVE.

!

1 - A - WARRANTY

)

The use of this compressor is reserved only for pneumatic starting of  DIESEL engines or Gas
engines, for all other uses, please consult us.

)

This compressor has been specifically designed for the compression of air with an optimal
working ratio of 1/3 - 2/3 (working/stop).

)

It is guaranteed for one year against faulty construction and defective material, provided that
the user complies with the instructions given in this manual.

)

The Ervor guarantee only covers the free replacement of parts that have been proved defective
by our Technical Department.

)

The guarantee does not cover breakdowns due to lack of maintenance or the non-compliance
of instructions given for correct running of the compressor.
 It is the user's responsibility to guarantee against any electrical incidents by installing and
correctly connecting and mounting safety devices.

Содержание G06


















































Отзывы:

Нет отзывов