Instalacion_247.fm -
17
/11/1
5
CICLÓN Electromechanical Operator
51
INSTALLATION
Attach the arm to the operator
Option A: Operator with slide arm
Attach the arm to the door
1
Position the drag wheel (1), supplied with the arm,
in the operator shaft.
2
Install the arm (2) and the cap (3) using the
appropriate screw and washer. The installation
differs in line with the type of arm (slide or
articulated).
3
I247C1
Slide arm
Articulated arm
1
In T2000VFI, CLS210F, CL250F, CLS250F models,
unlock the motor with the unlocking key, see
section “Manual operation” on page 42.
2
Close the door and mark the arm bearing position
on the door (A).
3
Open the door to the required point and mark the
arm bearing position on the door (B).
4
Attach the rail (1) to the door (2), aligned with
regards to the two marks made.
See the sliding arm instructions.
Содержание CICLON CL210
Страница 2: ......
Страница 95: ...CICLON_SIN_ENC book Page 2 Friday June 11 2010 12 44 PM...