Erreka CICLON CL210, Руководство по установке

Страница: 44 / 96

DESCRIPTION OF THE PRODUCT
Descripcio
n_247.fm -
6/11/15
40
Installation Manual
2
GENERAL CHARACTERISTICS OF THE OPERATOR
The CICLON operator is constructed to form part of a
swing door automation system.
It comprises a metal body, which contains the motor
and a planetary gearbox. Allows a maximum opening of
approximately 130°.
The CICLON operator, along with its corresponding
Erreka control board, allows the implementation of a
soft-stop system, with the speed slowing down at the
end of the closing and opening operations.
The T2000VFI, CLS210F, CL250F, CLS250F models have
a brake and unlocking key to operate the door manually
in the event of failure or interruption of the electricity
supply.
The CLS210F, CLS250F models, apart from a brake and
release key, are fitted with an encoder.
With the CL210 and CL250 models it is always
necessary to install an electrical lock, and with other
models only for leaf lengths over 1.8 m.
The CL210, T2000VFI and CLS210F models can be
installed with articulated arm or slide arm. The CL250,
CL250F and CLS250F can be installed with slide arm.
3
MAIN OPERATOR PARTS
Fig. 2 Main components
Components:
1 Operator body
2 Release lock (only in models with
brake)
3 Drag wheel
4 Wall bracket
5 Arm (not included with the
operator)
Cabling:
• Grey wire: motor (common)
• Brown wire: motor (rotation 1)
• Black wire: motor (rotation 2)
• Yellow/green wire: earth
• Orange wire:
no encoder : not included
with encoder : brake
• Purple wire:
no encoder : not included
with encoder : brake
• Blue wire:
no encoder : not included
with encoder : encoder signal
• White wire:
no encoder : brake
with encoder : common (–) of
the encoder
• Red wire:
no encoder : brake
with encoder : power supply (+)
of the encoder