manualshive.com logo in svg

ERMA SSI 9005, Инструкция по эксплуатации, Страница: 4 / 40

Поделиться
Скачать
ERMA SSI 9005 Скачать руководство пользователя страница 4

8.4.1. Alarm out put functions. . . . . . . . . . . . . . . 23

8.4.2. Alarm high set point . . . . . . . . . . . . . . . . 24

8.4.3. Alarm low set point . . . . . . . . . . . . . . . . . 24

8.5. Pro gram ming  le vel  for  ana log  out put  P-03 . . . . . . . . 25

8.5.1. Sca ling of the ana log out put. . . . . . . . . . . . 25

8.5.2. Ana log  out put  at  fai lu re  In di ca ti on 

. . . . . . . . 26

8.5.3. Ana log out put at over flow resp. un der flow . . . . 26

8.6. Pro gram ming  le vel  of  se ri al  in ter fa ce  P-04 . . . . . . . . 27

8.6.1. Trans mis si on-Mode . . . . . . . . . . . . . . . . 27

8.7. Pro gram ming  quick  re fer en ce . . . . . . . . . . . . . . . 28

9. Soft wa re  functions . . . . . . . . . . . . . . . . . . . . . . . 30

9.1. Mas ter/Sla ve-Mode . . . . . . . . . . . . . . . . . . . . 30

9.2. Zero point ad just ment . . . . . . . . . . . . . . . . . . . 30

9.2.1. Zero point ad just ment by pres sing but ton . . . . . 30

9.2.2. Zero point ad just ment by off set va lue . . . . . . . 31

9.3. In cre men tal  mea su re ment . . . . . . . . . . . . . . . . . 32

9.4. Di rec ti on  of  ro ta ti on . . . . . . . . . . . . . . . . . . . . 32

9.5. MIN/MAX  va lue  de tec ti on . . . . . . . . . . . . . . . . . 32

9.6. Hold functi on . . . . . . . . . . . . . . . . . . . . . . . . 33

9.7. Re mo ving bits of the en co der va lue . . . . . . . . . . . . 33

9.8. Dis play  test . . . . . . . . . . . . . . . . . . . . . . . . 35

9.9. Main re set . . . . . . . . . . . . . . . . . . . . . . . . . 35

10. Er ror  codes . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

10.1. En co der  not  con nec ted  “Err01" . . . . . . . . . . . . . . 35

10.2. Wai ting for data in put “Err02" . . . . . . . . . . . . . . . 35

10.3. Ex ter nal clock fre quen cy too high “ERR03" . . . . . . . . 35

11. Tech ni cal  Spe ci fi ca tions . . . . . . . . . . . . . . . . . . . . 36

11.1. Elec tri cal  da tas. . . . . . . . . . . . . . . . . . . . . . . 36

11.2. Me cha ni cal  da tas . . . . . . . . . . . . . . . . . . . . . 37

11.3. En vi ron men tal  con di tions . . . . . . . . . . . . . . . . . 37

12. Or de ring  In for ma ti on . . . . . . . . . . . . . . . . . . . . . . 37

13. No tes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

4

ERMA-Electronic GmbH

 

Содержание SSI 9005









































Отзывы:

Нет отзывов