Ericsson TANDBERG Television iPlex N20001, Руководство по установке, Страница: 85 / 98

iPlex Installation and Hardware Specification Guide
85
cursor changes to a hand, a click will display the statistics page for that component.
To view the home page completely, it is necessary to set your monitor resolution to
1280 x 1024. However, the screen is more readable at lower resolutions.
Menu Links
On the left side of the iPlex home page are five links that give you access to the
following pages: Home, Statistics, Configuration, Maintenance, and Diagnostics.
Click on the major menu items and additional links appear under the tree depend-
ing on the blades and submodules installed in your chassis.
Statistics
The Statistics page allows you to view information gathered from the iPlex. By
clicking Statistics, the next level of the tree displays providing information on the
iPlex chassis, Configuration File, IP Routing, SCMs and MCMs. The first page
gives general information on the iPlex chassis and its major components.
If the input Transport Stream is active, you will see that the physical submodule
and the MPMC is flashing with a green LED. By clicking the port, the current sta-
tistics will display. You can achieve the same thing through the menu tree. In the
ASI Statistics page, by default, you will see MPEG Programs information on the
Transport Stream. By clicking Elements or Streams radio buttons, further infor-
mation about the stream’s contents will display, such as PIDs, Stream Type, and
Program Number. However, if the stream contains SDT and NIT you will have to
configure the port as DVB to see that program information.
Configuration
Configuration allows you to configure the iPlex. By clicking Configuration , the
next level of the tree control displays, which allows you to create a new logical
port, create a redundant partnership, create media and network routing, and con-
figure existing physical ports. Moreover, it allows you to configure Configuration
Files, IP Routing, SCM and MCM blades.
NOTE
The backup Home Page displays a reduced menu tree.
NOTE
After you configure your system and are confident everything is
working correctly, Tandberg recommends that you copy the configu-
ration file at that point to the startup file in order to have a known
starting point should the system ever have to be rebooted. For the
procedure on how to do this, see one of the following manuals:
CLI Guide: Copy command
GUI Guide: Config File section in the Using the GUI Interface
chapter.