Ericsson iPECS-100 Скачать руководство пользователя страница 305

Страница: 305 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

268

SLT

To leave a Message Wait, while receiving ring back tone or no response on a call announce
(H or P mode)

1. Momentarily press the hook switch.

2. Dial

“556”, the Message Wait/Call Back code.

3. Hang up, Message Wait activated.

To leave a Message Wait, while receiving DND tone

1. Momentarily press the hook switch.

2. Dial

“556”, the Message Wait/Call Back code.

3. Hang up, Message Wait activated.

To retrieve a Station Message Wait;

1. Dial

“557”, the Message Wait/Call Back Answer code.

To leave a Call Back (queue for a station), while receiving busy

1. Momentarily press the hook switch.

2. Dial

“556”, the Message Wait/Call Back code.

3. Hang up, return to idle.

To respond to a Call back recall, when the busy station is available the system calls back,

1. Lift the handset.

2. Previously busy station is called.

Conditions

1. A Message Wait/Call Back return call will always ring at the receiving station

overriding the Intercom signaling mode selected.

2. A station can leave only one callback request.

3. The

[MSG/CALLBK]

button LED will continue to flash until all Message Wait and

Call Back requests, including Voice Mails, have been serviced.

4. If a station is attempting to leave a message and the system Message Wait queue

is full, the station will receive ICM busy tone.

5. A Message Wait remainder tone can be enabled to remind the user of messages

waiting.

6. A station in Call Forward can leave a message wait.

7. A Message Wait indication is left at the originally called station even if the call is

forwarded.

8. An iPECS Phone with LCD may call back to stations that left messages in any

desired order, or the normal

(“oldest first”) order.

9. Placing an Intercom call to a station will cancel any existing Message Wait from that

station.

Programming

SYSTEM

1 Message Reminder Tone Timer (PGM 181-Btn 8)

Содержание iPECS-100

















































































































































































































































































































































































































































































Результаты поиска

Содержание iPECS-100

Отзывы:

Похожие инструкции для iPECS-100

Бренды по названию

Популярные бренды

Ericsson iPECS-100, Описание функций и руководство по эксплуатации

Результаты поиска

Содержание iPECS-100

Отзывы:

Похожие инструкции для iPECS-100

Бренды по названию

Популярные бренды