Ericsson iPECS-100 Скачать руководство пользователя страница 253

Страница: 253 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

221

1. Greeting length: 00-99 seconds (60 seconds default)

2. Message length: 000- 600 seconds (0 default) ( 0 - VSF User Max Rec Tmr,

PGM181-3)

3. Number of messages: 00-250 (0 default) (0- Number of message is the same as

system capacity)

4. Retention time: 00-99 days (0 days default) (From Time Set, PGM191-1)

5. E-mail notification (Disable/Notification only/ Notification and Delete, default:

Notification and Delete)

6. Future delivery messages (on/off, Off default)

7. Confirm message receipt (on/off, Off default)

8. Private message mark (on/off, Off default)

Conditions

1. The default class of service for all mailboxes is 1. COS 1 contains all default

settings.

2. Future delivery message feature is not supported.

Programming

VM COS (PGM 253) will be added for the above settings.

Related Features

Hardware

2.73.11 Send Message

Description

A user can record the message and send it to other mail box with several options or distribution
list.

Operation

The main menu prompt will be modified to add

“To send a message press 4”.

Main Menu

to send a message, press four

Step 1

– Record Voice Message.

To send a message, user can press [4] in the main menu and record a message.

The prompt will state

“At the tone, please leave a message and to stop recording

press pound key

”

Step 2

– Decision of Destination

The prompt will state

“Enter the mail box number or distribution list number followed

by pound. To spell the name, press *

”

Содержание iPECS-100

















































































































































































































































































































































































































































































Результаты поиска

Содержание iPECS-100

Отзывы:

Похожие инструкции для iPECS-100

Бренды по названию

Популярные бренды

Ericsson iPECS-100, Описание функций и руководство по эксплуатации

Результаты поиска

Содержание iPECS-100

Отзывы:

Похожие инструкции для iPECS-100

Бренды по названию

Популярные бренды