PowerTerm LTC
62
Users Guide
4.
Click OK.
To define parameters for automatic closing PowerTerm LTC when
disconnecting a session:
Close PowerTerm LTC altogether on disconnect.
1.
Select Terminal | Setup. The Terminal Setup dialog appears.
2.
Select the Preferences tab.
3.
Select Auto Exit PowerTerm LTC in the On session exit section.
4.
Click OK.
To manually reconnect to a PowerTerm LTC session after exiting the
current session:
PowerTerm LTC displays the following message at session termination when Auto
Exit PowerTerm LTC in the Preferences tab is cleared:
where <exit code> may have one of the following values:
Zero (0)
Communication ended successfully.
Any number (other than 0)
Communication aborted. The exit code
points to the error that caused the
problem.
Press Enter on the keyboard.
To automatically reconnect a PowerTerm LTC session after exiting the
current session:
Re-establish communication if the line was disconnected.
1.
Select Terminal | Setup. The Terminal Setup dialog appears.
2.
Select the Preferences tab.
Содержание PowerTerm LTC
Страница 1: ...PowerTerm LTC Version 9 1 User s Guide...
