SAMPLE DRUM
Please follow the instructions for use of the Erica Synths module below, ‘cause
only this will guarantee proper operation of the module and ensure warranty
from Erica Synths.
Water is lethal for most of the electric devices, unless they are made waterproof. This Erica Synths module is NOT intended for use in a humid or wet
environment. No liquids or other conducting substances must get into the module. Should this happen, the module should be disconnected from mains
power immediately, dried, examined and cleaned by a qualified technician.
Transport the instrument carefully, never let it drop or fall over. Warranty does not apply to modules with visual damages.
Do not expose the module to temperatures above +50° C or below -20° C. If you have transported module in extreme low temperatures, leave it in
room temperature for an hour before plugging it in.
The module has to be shipped in the original packaging only. Any module shipped to us for return, exchange and/or warranty repair has to be in its
original packaging. All other deliveries will be rejected and returned to you. Make sure you keep the original packaging and technical documentation.
This device complies to the EU guidelines and is manufactured RoHS conforming without use of lead, mercury, cadmium and chrome. Nevertheless,
this device is special waste and disposal in household waste is not recommended.
You will find Erica Synths terms of warranty at
www.ericasynths.lv
Items for return, exchange and/or warranty repair have to be sent to:
Erica Synths
Andrejostas Str. 43
Riga
Latvia
LV-1045
User manual by Girts Ozolins@Erica Synths.
Design by Ineta Briede@BLACK8.
Copying, distribution or any commercial use in any way is prohibited and needs the written permission by Erica Synths.
Specifications are subject to change without notice.
In case of any questions, feel free to contact us through www.ericasynths.lv or via e-mail [email protected]
Power off the Sample Drum. Copy the latest firmware file to the root directory of the
SD card and insert the SD card in the module and power it on.
The module will automatically detect the latest firmware version on the SD card and
compare it with the one installed.
Push the encoder A/DATA to initiate the firmware update procedure or push the
encoder C to quit the firmware update. Only the firmware files will be replaced, all
settings and samples on the SD card and in the module will remain unchanged.
Once the update is completed press the A encoder or power off the module and power
it on again. Enjoy the great features of the latest firmware!
FIRMWARE
UPDATE
SAFETY
INSTRUCTIONS
