CGS738 Mangler
ELBY Designs - Laurie Biddulph
9 Follan Close, Kariong, NSW 2250, Australia
[email protected]
http://www.elby-designs.com
1 of 4
Construction Guide
Revision 1.0May 1, 2020
Страница 1: ...GS738 Mangler ELBY Designs Laurie Biddulph 9 Follan Close Kariong NSW 2250 Australia elby designs bigpond com http www elby designs com 1 of 4 CGS738 Mangler Construction Guide Revision 1 0 May 1 2020...
Страница 2: ...dy of the LED and taking note of the orientation of the LED to the PCB Slip the legs in to place on the PCB while also feeding the LED head in to the panel hole When completed the LED legs should clea...
Страница 3: ...rm will develop a glitch as shown to the left Set the KILL switch to K1 and repeat this time adjusting the IN 2 level pot Slowly wind the pot back until the LED just stops flickering The glitch in the...
Страница 4: ...ralia elby designs bigpond com http www elby designs com 4 of 4 Adjust P105 until the glitch disappears The waveform should look similar to that shown at left There will probably be a DC offset as you...
