background image

18/21

1

1

5

5

6

2

2

3

3

4

4

EN

888-24-092-G-02 rev. H • 05/11

Ergonomics

Working

customize - to your size

1 Set top of monitor screen about one inch below eye level - Release brake and lift or lower riser 
as needed.

2 Tilt screen for comfortable viewing and to reduce eye and neck strain.

3 Pull keyboard tray forward and position mouse tray and mouse pouch on right or left, as needed.

4  Work with elbows bent at about 90° to minimize muscle strain.

5 If the riser moves up and down with diffi

  culty, or if it drifts out of set position, consult the product 

manual for adjustment information.

6 Stay in charge!
Powered carts should be plugged into outlet as often as possible to keep battery charged and 
computer running.

Moving

stow - before you go

1 During normal movement, release brake and lower worksurface to 
lowest position for optimal stability and unobstructed view.

2 Tuck away open trays and return mouse, scanner and other accessories 
to their places.

3 Unlock both front casters.

4 Push cart from rear with elbows bent at about 90° to maximize control 
and minimize muscle strain.

5 Don’t run out!
Before moving, make sure cord is unplugged from outlet and hooked to 
basket for safe travel.  Remember, charge battery fully 100% every day!

Maintenance & Safety

 

Color

Symbol

 

Signal 

Word

Level of Hazard

Red

DANGER

Indicates an imminently hazardous situation which, if not 
avoided, will result in death or serious injury.

Orange

WARNING

Indicates a potentially hazardous situation which, if not 
avoided, could result in death or serious injury.

Yellow

CAUTION

Indicates a potentially hazardous situation which, if not 
avoided, may result in minor or moderate injury.

None

CAUTION

Used without the safety alert symbol indicates a poten-
tially hazardous situation which, if not avoided, may 
result in property damage.

Red,

Orange

or 

Yellow

Electrical

Indicates an impending electrical hazard which, if not 
avoided, may result in personal injury, fi re and/or death.

Hazard Symbols Review 

The Meaning of Symbols appearing in this Guide, on the Cart or on the Power System
These symbols alert you to a safety condition that demands your attention. You should be able to recognize and 
understand the signifi cance of the following Safety Hazards if you encounter them on the Cart or within Cart 
documentation such as this Set-up Guide.

EQUIPMENT & ACCESSORIES DISPOSAL

1. Please dispose of all batteries in accordance with 

local law

2. User Interface, Auto-lock Drawer, and Ready On 

Module should be recycled through an electronics 
recycler.

3. Remaining plastics and metals can be recycled 

through a commercial recycler.

Содержание StyleView SV32






















Отзывы: