19
HOSE TROUBLE SHOOTING
HOSE DOES NOT HEAT
Step 1:
Is the “HEATED HOSE” switch “ON”?
YES:
Go to step 2
NO:
Turn switch “ON”.
Step 2:
Is “HEATED HOSE” light illuminated?
YES:
Go to step 3
NO:
Check for tripped circuit breaker in front panel.
YES:
Reset circuit breaker.
NO:
Remove front panel and check for 12 volts at purple wire on
hose switch.
YES:
Go to step 2a.
NO:
Check for 12 volts at circuit breaker in front panel.
Step 2a:
Check for 12 volts at #3 terminal (purple wire) on Pak-Stat.
YES:
Go to step 2b.
NO:
Check wire connections or replace switch.
Step 2b:
Check for 12 volts at #7 terminal (blue wire) when Pak-Stat is on.
YES:
Go to step 3
NO:
Replace Pak-Stat.
YES:
Check wire connections (red wire) between circuit breaker and switch
NO:
Check wire connections between “ACC” teminal on ignition switch
and “A” terminal on plug #2.
Step 3:
Check for 12 volts at “BATT” terminal on generator.
YES:
Go to step 4
NO:
Check wire connections between (blue wire) in control box to
“BATT” terminal on generator.
Содержание Crafco BAX 250
