- 38 -
↑
↓
↑
↓
S
ETTINGS
FOR
C
ONTROL
T
ERMINALS
K
Some of the device settings are confi gurable to meet spe-
cifi c requirements. The settings will be saved and remain
stored even when the ergometer is switched off .
Select SETTINGS to display the confi guration menu.
When all changes have been made, you can exit the confi -
guration menu with the
key.
Use the softkeys (
↑
↓
) to position the bar cursor on the pa-
rameter to change and confi rm the selection with SELECT.
D
EFAULT
M
ODE
In this menu you choose the default mode activated when
the ergometer is turned on. When fi rst turned on, the
ergometer will display this menu.
Use the softkeys (
↑
↓
) to position the bar cursor on your
preferred default mode and save the selection with SELECT.
P
ROTOCOLS
Protocols 6 - 15 are user-programmable (protocols 1 - 5
are fi xed, see Appendix for protocol parameter details).
Standard values for the following parameters can be
entered:
- test protocol type (step/ramp)
- initial load
- stage time
- load increment (load increase with each stage)
- NIBP lead time (blood pressure measurement)
- recovery load
- recovery time
Use the softkeys (
↑
↓
) to position the bar cursor on the
protocol to change (No. 6 - 15) and confi rm the selection
with SELECT.
S
ELECTING
THE
EXERCISE
TEST
PROTOCOL
TO
EDIT
C
ONFIGURATION
MENU
Settings
Default Mode
Protocols
Contrast
Load Change
Language
Beep
Software Version
Date/Time
Training
Select
EKG Type
Choose function
Protocols
1.
WHO
2.
BAL
3.
Hollmann
4.
STD. France
5.
Standard
6.
25W / 2min / 25W
7.
25W / 2min / 25W
8.
25W / 2min / 25W
9.
25W / 2min / 25W
Select
10.
25W / 2min / 25W
Choose function
