The Griplates™ have M4, M5, M6 and M8 hole
patterns to fi t the hardware that your fl at panel
requires. Eg. If your fl at panel uses M8 screws, use
the M8 mounting points.
NB.
Pre-install the mounting screws, universal
spacers and Griplates™ . Once mounted, push down
to eliminate movement from the bracket, then
tighten the rest if the hardware. Repeat this process
for the installation of the remaining bracket.
Mounting Bracket Installation
This kit provides a variety of screws with diff erent
lengths and diameters to accommodate most fl at
panels.
NB.
The number and location of mounting points
will vary between manufacturers.
Do not over-tighten the screws.
Place your fl at panel screen down on a soft, fl at
surface and locate the threaded mounting points
that are located on the back of the fl at panel.
Determine which screw is the correct length.
Attach each bracket to the fl at panel by aligning the
holes on each bracket with the threaded inserts on
the back of your fl at panel, insert the screws through
both and turn clockwise until they are fully inserted.
Griplate™ Installation
1
2
3
DIMPLES
FACING UP
DIMPLES
FACING DOWN
DIMPLES
FACING UP
DIMPLES
FACING DOWN
Dimples
M8
M6
M5
M4
Mounting Hardware
Mounting Bracket
Griplate™
Mounting Point
Universal Spacer
Flat Panel
Installation
7
