Ergo EMCTM-MS2, Руководство по установке

Страница: 5 / 8

Installation
The Griplate™ has M4, M5, M6 and M8 hole patterns
to fi t the hardware that your fl at panel requires.
Example: If your Plasma uses M8 x 20 Phillips screws
use the M8 Mounting hole on the Griplate™.
NB The upper Griplate™ must be mounted with the
dimples facing up. The lower Griplate™ must be
mounted with the fl at side facing up.
Pre-install two (2) M6 x 30mm Phillip pan screws to
the bottom of the left and right hand side mounting
brackets.
Once the mounting brackets are aligned secure the
Griplate™ to the fl at panel.
1
2
Griplate™ Installation
1
2
Using a (commercially available) wood stud fi nder,
locate the 16" or 24" stud centres behind the wall.
Once found, make a pencil marking on the centre of
the wood studs.
Place the wall plate to the reference line and mark
the four (4) lag bolt mounting points through the
wall plate slots on the wall.
Level the wall plate with the reference arrow
pointing up to the ceiling.
Drill four (4) 1/4" pilot holes to the marked wall.
Secure the plate using the four (4) 5/16" lag bolts
and fl at washers.
Wall Stud Location
DIMPLES
FACING UP
DIMPLES
FACING DOWN
DIMPLES
FACING DOWN
DIMPLES
FACING UP
Phillips Head Screwdriver
Dimples
M8
M6
M5
M4
1
2
16"
CE
NTE
RO
FV
IE
WI
NG
HE
IG
HT
D
ES
IR
ED
16"
Wall
Stud fi nder
Wood Stud
Viewing Height
Mark
3
4
5
6
16"
Wall Plate
Flat Washer
Lag Bolt
Socket