Installation
Insert the thread depth indicator (supplied) through
the thread inserts found on the back of the fl at
panel to make sure the inserts measure the same full
depth and mark it.
Locate the correct diameter screw for the thread
insert. Compare your marking to the screws
supplied.
If the selected screw is longer than the marking on
the thread depth indicator, DO NOT USE this screw.
The screw length must not bypass the marking.
Select another screw size (fi gure 2 and 3), unitl you
fi nd one that comes closest to your mark without
going past.
1
2
3
Thread Depth Indicator
1
2
3
4
Inverted fl at
panel display
Marking the depth
Thread insert
Thread depth indicator
Thread depth
indicator
Screw
Marking
Screw
Thread depth
indicator
Marking
NB
Proper installation procedure by qualifi ed
personnel as outlined in the installation instructions
must be adhered to. Failure to do so could result in
serious personal injury and possible damage to the
fl at panel.
NB
Invert the fl at panel, place it on a soft, fl at surface
to prevent damage to the fl at panel. Use a blanket,
foam, etc. Failure to do so will result in damaging
the fl at panel. Do not lay the fl at panel on the fl oor
without any protection to the glass. The fl at panel
is heavy and fragile. At least (2) qualifi ed personnel
are strongly recommended for installation of this
product. Failure to do so could result in serious
injury and possible damage to the fl at panel.
Once the fl at panel is inverted, use a measuring tape
to fi nd the centre of your fl at panel measuring from
outside to outside of the chasis.
Use a pencil to lightly mark the centre of your fl at
panel.
Finding the centre of the Plasma display
CL
Top of Flat Panel
Tape Measure
Inverted Flat Panel
Bottom of Flat Panel
L
C
1
2
Marking the Centre of the
Flat Panel
Inverted Flat Panel
Содержание EMCTM-MS2
Страница 1: ...EMCTM MS2 Flat Panel Display Mount...
