UV24-SA+
367-5472
INSTRUCTION SHEET
Ba�ery disposal is controlled by law and requires proper ac�on.
Recycling and Refuse collec�on can be handled by commercial waste contractors, municipali�es,
or other local household waste programs.
Internal Clock Ba�ery
Locate centers near you:
search.earth911.com
EPA
www.epa.gov
Federal Universal Waste Rule
Resources
www.lamprecycle.org
batteryresponsibility.org/battery-recycling
Quick Set-Up
A�ach bracketry according to instruc�ons found in this guide. See contents below.
A�ach the power cable to the circular jack on the back of the UV-Clean unit.
Power the device by plugging in the opposite end of the power cable to the
supplied adapter, or another
USB 3.0
device with output power of 900 mA.
Set-up is complete.
Do not a�empt to service this product. Contact customer service at Proximity Systems for guidance.
Do not subject the bulb to fingerprints, solvents or abrasion.
Cleaning the bulb with a damp cloth or lens �ssue is advised when the unit is not plugged in and the
device is at room temperature only.
Maintenance
4
SAFETY & DISPOSAL
Appropriate use of this product is expected and is the responsibility of the purchaser of this product.
This product uses UV-C light. Eyes and skin should be kept from exposure.
Eye inflamma�on and skin irrita�on can occur from prolonged exposure. For sensi�ve skin, burns may occur.
Do not touch the glass UV bulb surface. Fingerprints create a barrier and reduce UV ability.
Do not use this device on people, food, or pets.
Keep out of Reach of Children. This product is not a toy.
Do not a�empt to disassemble this product. Nor is it serviceable. Warranty will be void.
This UV bulb contains mercury in very small amounts. Precau�ons should be used to prevent breakage.
Mercury may cause injury if swallowed and is known to cause reproduc�ve harm.
Dispose of this product responsibly per regula�ons.
Do not expose this product to water, liquids or moisture. Electricity is present.
UV-C can discolor materials such as plas�c and fabric over a period of �me.
Designed For
1. Commercial, Indoor use only
2. Al�tude up to 3050m
3. Working temperature: 20 - 27 degrees C (68-80 deg F). Humidity 20-90% (non-condensing).
Storage temperature: -20 - 55 degrees C (-4-130 deg F). Humidity <85% (non-condensing).
Environmental Condi�ons for Opera�on
Breakage: All visible bulb components should be cau�onarily swept into a sealable bag, box or jar and taken
outdoors.
Cau�on: The UV bulb contains a very small amount of mercury.
As suggested by the EPA, do not vacuum up broken glass unless it is the only remaining debris. The same
steps used to clean-up common CFL’s may be used for this UV bulb.
As listed here: h�ps://www.epa.gov/cfl/cleaning-broken-cfl
Recycling may be an op�on in your area.
www.lamprecycle.org/state-local-laws
When done, this prevents mercury from entering the environment and reuse of glass, and metal is possible.
Refuse collec�on can be handled by commercial waste contractors, municipali�es, or other local household
waste programs.
UV Bulb
P
ower Cable
5mm , US
B
-
A
DC 5V
P
ower Supply
Micro-US
B
Data Cable
1. Status
Indicator
2. Mo�on Sensor
3. Push Bu�on
For Task Light
5. Micro-USB
Data
Receptacle
Detec�on for
UV auto shut-off
feature
Control the on/off
of the LED task Light
DC 5V supply
included, 5mm jack
Retrieve cleaning
cycle informa�on
stored internally
4. Power
Receptacle
Blue Blink = Bulb Failure
White = On, Stand By
Blue = Cleaning
2
1
3
5
4
R
ear View
F
ront View
UV24 Unit
White = On, Stand By
Blue = Cleaning
Blue Blink = Bulb Failure
Stand
Tray
#8-32 X 5/16"
Long Phillips Screws
(X2)
