Erco ES-650PIA, Оригинальное руководство оператора

Страница: 13 / 24

13
After checking the oil levels and refilling fuel, the unit is
now ready for operation.
A possible readjustment of the Bowden cable can be
made at the counter holder of the Bowden cable.
The additional plate on the tension pulleys can be
mounted optionally and improves the stopping of the
V-belt.
Now mount the intake nozzle, align it parallel to the
ground and tighten it hand-tight with the toggle screws.
Attention!
In order for the ES-650PIA to reach its optimum perfor-
mance and noise level, it is essential to set the maxi-
mum engine speed to 3,000 rpm!
Connect a RPM meter to the ignition and set the maxi-
mum RPM to 3,000 ± 50 by using the stop screw.
Operators Manual ES-650PIA