Erbauer ERB337TCB, Инструкция по безопасности и эксплуатации

Страница: 13 / 19

ERBAUER 750W TILE CUTTER
Fig 10
NSTALLATION OF THE PARALLEL GUIDE
- Unplug the tile cutter from the mains supply.
- Insert spring, clamp, washer and knob to the bolt
of parallel guide (Fig 6), then tighten the knob to
fix this part in parallel (Fig 7).
- Put the parallel guide onto the work table and fix
it using the plastic securing knob (Fig 8).
- Mitre cutting can be performed by using the
mitre cutting guide. The angle can be adjusted
from 0° to 45° by unscrewing the plastic screw
(Fig 9).
- To perform 22.5° or 45° bevel cutting, raise one
side of the table, lever out the support and locate
the tabs into the corresponding holes in the deck
(Fig 10). Ensure that the deck is correctly
secured before working.
Fig 6
Fig 7
Fig 8
Fig 9