Erbauer ERB337TCB, Инструкция по безопасности и эксплуатации

Страница: 4 / 19

GENERAL SAFETY INSTRUCTIONS
WARNING! Read all instructions Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury. The term
"power tool" in all of the warnings listed below refers to yourmains operated (corded)
power tool or battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1. keep work area clear. Cluttered areas and benches invite injuries.
2. Consider work area environment Do not expose tools to rain. Do not
use tools in damp or wet locations. Keep work area well lit.
Do not use
tools in the presence of flammable liquids or gases.
3.
Guard against electric shock Avoid body contact with earthed or grounded surfaces
(e.g. pipes, radiators, ranges, refrigerators).
4. Keep other persons away. Do not let persons, especially children, not involved
in the work touch the tool or the extension cord and keep them away from the
work area.
5. Store idle tools. When not in use, tools should be stored in a dry locked-up place,
out of reach of children.
6. Do not force the tool. It will do the job better and safer at the rate for which it
was intended.
7. Use the right tool. Do not force small tools to do the job of a heavy
duty tool.
Do not use tools for purposes not intended; for example do not use
circular saws to cut free limbs or logs.
8. Dress properly. Do not wear loose clothing or jewellery, they can be
caught in moving parts. Non-skilled footwear is recommended when
working out doors.
Wear protective hair covering to contain long hair.
9. Use protective equipment. Use safety glasses. Use face or dusk mask if
working operations create dust.
10. Connect dust extraction equipment.
If the tool is provided for the connection
of dust extraction and collecting equipment, ensure these are connected and
properly used.
11. Do not abuse the cord.Never yank the cord to disconnect it from the
socket.
Keep the cord away from heat, oil and sharp edges.
12. Secure work. Where possible use clamps or a vice to hold the work. It
is safer than using your hand.
13. Do not overreach. Keep proper footing and balance at all times.
14. Maintain tools with care. Keep cutting tools sharp and clean for better
and safer performance. Follow instruction for lubricating and changing
accessories. Inspect tool cords periodically and if damaged have them
repaired by an authorised service facility. Inspect extension cords