Erbauer ERB337TCB, Инструкция по безопасности и эксплуатации

Страница: 11 / 19

ERBAUER 750W TILE CUTTER
- Unplug the tile cutter from the mains supply.
- Remove the cover (45° vertical fence) of the
water reservoir.
- Remove the two screws and washers from the
top of the deck, slide the metal bracket into the
desired position (Fig 1) and then fix in place
re-using the two screws and washers. Ensure the
bracket is perpendicular to the deck and
positioned inline with the blade. Loosening these
screws allows some minor adjustment to ensure
the bracket does not foul the tile when cutting, or
if the laser needs slight re-alignment.
- Put the cover (45° vertical fence) back into position.
This tile cutter shall be used only to cut tiles to a
required size or shape. It shall not be used to cut
inflammable, explosive or toxic materials. Other
uses for the machine will lead to the damage of
the machine and a series of dangers to the
operator. This appliance is for private and
household use, not for professional or industrial
ones. Only identical accessories as the ones
provided with the tile cutter are authorised.
Never use the appliance in the rain or other wet
conditions.
The tool is packed complete in one carton. When
unpacking and checking the contents of the
carton, separate all the parts from the packing
material and check each one against the pack
contents shown below to make sure that all
items are accounted for. If any parts are missing,
do not attempt to assemble, or use the tile cutter
until the missing parts are obtained and installed
correctly. Any missing parts should be reported
immediately to the store from which you
purchased the tool.
2. ASSEMBLY
INSTALLATION OF THE METAL BRACKET
1. UNPACKING
OPERATION INSTRUCTIONS
Fig 1