Erbauer ERB2502SE Скачать руководство пользователя страница 5

Страница: 5 / 36

254MM (10”) COMPOUND MITRE SAW

f. Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts.

Loose clothes, jewellery

or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly used.

Use

of these devices can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your

application.

The correct power tool will do the job better and safer at the rate for which it was

designed.

b. Do not use the power tool if the switch does not turn it on and off.

Any power tool that cannot be controlled with the switch is dangerous and must

be repaired.

c. Disconnect the plug from the power source before making any

adjustments, changing accessories, or storing power tools.

Such

preventive safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool.

Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving

parts, breakage of parts and any other condition that may affect the

power tools operation. If damaged, have the power tool repaired before

use.

Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc., in accordance

with these instructions and in the manner intended for the particular

type of power tool, taking into account the working conditions and

the work to be performed.

Use of the power tool for operations different from

intended could result in a hazardous situation.

Service

a. Have your power tool serviced by a qualiﬁed repair person using

only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

HEALTH ADVICE

Warning

When drilling, sanding, sawing or grinding, dust particles will be produced.

In some instances, depending on the materials you are working with, this dust can

be particularly harmful to you (e.g. lead from old gloss paint). You are advised to consider

the risks associated with the materials you are working with and to reduce the risk of

exposure. You should:

- Work in a well-ventilated area.

- Work with approved safety equipment, such as those dust masks that are specially

designed to ﬁlter microscopic particles.

Содержание ERB2502SE





































Результаты поиска

Содержание ERB2502SE

Отзывы:

Бренды по названию

Популярные бренды

Erbauer ERB2502SE, Руководство пользователя

Результаты поиска

Содержание ERB2502SE

Отзывы:

Бренды по названию

Популярные бренды