background image

 

3. SPECIFICATIONS (23

?  ± 

5

?

Air Velocity Measurement: 

Unit 

Range 

Resolution 

m/s 

0.01~25.00  0.01

 

±3%of 
reading  
±1.6%FS 

Km/hr(kph) 

0.02~90.00  0.1  

mph 

0.12~55.9 

0.1

 

Knots(kts) 

0.11~48.6  

0.01  

Ft/min(fpm)  0~4921.0 

0. 1

Beaufort 

1~10 

 

Air Flow(volume) Calculate: 

Unit 

Range 

Resolution

CMM 

0~9999 

0.1  

CFM 

0~9999 

0.1  

 

Temperature Measurement: 

Unit 

Range 

Resolution

 

?

 

-20~50 

0.1 

±1

?

 

?

 

-4~122 

0.1 

±1.8

?

 

 

 

Accuracy

 

Accuracy

 

Accuracy

 

 

       

 

interference (EMI) which may cause erratic 
readings. 

  Pleas e turn off the meter to avoid the sensor 

burned when you have finished testing the high 
wind speed (more than 20m/s) and remove the 
probe.  

  T o extend the probe, hold the handle in one 

hand while pulling on the probe tip with the 
other hand. Do not hold the cable while 
extending the probe. 

  Remov e the sensor protective cover, make 

sure the sensor window is fully exposed and 
the orientation is facing upstream. 

  T o retract the probe, hold the handle in one 

hand while pushing on the probe tip with the 
other hand. If the probe antenna binding, 
please gently straightened probe, and then the 
rest of the extension of section pressure back 
and don’t pull the cable.    

 

 

20.  SOFTWARE INSTALLATI ON(TM-4001) 

Please refer to the TM-4003 installation CD 
execution. 

 

Содержание EQ-TM- 4001









Отзывы: