Time constant setting mode operation:
1. Press
to into time constant setting mode.
2. In the setting the time constant setting mode
that can press
,
,
,
button to
change the digit and press
to confirm.
13. AIR FLOW SETTING MODE
Press
button to select Area and press
button to into the air flow setting mode and press
to exit the air flow setting mode.
Air flow setting mode operation:
1. Press
button or
button to
selected Area or the area of a circle, square
area, and press
button to into setting the
size of area.
2. In the setting the size of area that can press
,
,
,
button to change the digit
and press
to confirm.
14. DATA H OLD
Press
button to enable or disable hold
function.
?
The HOLD function will be unavailable if
calibration function is enabled.
%RH: humd
i ity indication.
ºC: Degree Celsius.
ºC: Degree Fahrenheit.
hPa: Hectopa
scal indication.
inHg: Inch of mercury.
mmHg: Millimeter of mercury.
CFM: Cubic feet per minute.
CMM: Cubic meters per minute.
2/3V MAX : 2/3V Maximum mode is selected
indication.
×10: Multiply reading by ten
×100: Multiply reading by hundred.
×1000: Multiply reading by thousand.
Third window: Air flow setting and record display
Sample: Sampling indication.
INTV: Sample interval indication.
Area: Duct area indication.
TC: Average time constant indication.
AVG: Average mode is selected indication.
K: Number of records by one thousand.
[
]: Round duct diameter dimension
Velocity and Absolute Pressure Display.
WE
T: Wet bulb temperature indication.
DEW: Dew point temperature indication.
