QuadroE1/T1 Manual II: Administrator's Guide
Administrator's Graphical User Interface
QuadroE1/T1; (SW Version 3.0.x)
73
IP Pool
The Manage IP Pool Groups link opens the IP Pool Configuration page.
Fig. II-108: IP Pool Configuration page
The IP Pool table is the list of all added groups and the members
assigned to these groups. If a group is empty, EMPTY will be
indicated in the Members column. If hidden, group members will
still remain active but HIDDEN will be displayed in the Members
column.
The IP Pool Configuration is used to add groups of IP addresses
that have the same restriction criteria. Whenever adding a new
filtering rule, groups may be used instead of several IP addresses.
IP Pool Configuration offers the following components:
View makes hidden groups visible.
Hide makes group members hidden and adds the HIDDEN
comment in the member column.
Add opens the Add Group page where a new group may be
added. This page consists of the Group Name text field (requiring
the group name) and the Group Description text field (requiring
the optional group description), as well as standard Save and
Back buttons to apply or abort changes.
Edit opens the Edit Group page where the service parameters
can be modified. It provides the same components as the Add
Group page. To operate with Edit, only one record may be
selected, otherwise an error will occur: “One row must be
selected”.
Please Note:
Changing a group name will also change the
references to this group, including groups where this group is a
member of, and all affected filter rules (enabled and disabled ones,
in all chains).
Clicking on the Group name will display an IP Pool Group
Configuration page with the Members list for the current group.
Fig. II-109: IP Pool configuration – Add Group page
The IP Pool Group Configuration page displays a list of all the
added member IP addresses for the selected group. It offers the
following components:
Current Group provides read-only information about the current
group name the members are listed for.
Add opens the Add Member page where a new member may be
added.
Edit opens the Edit Members page where the service parameters
can be modified. This page includes the same components as the
Add Member page. To operate with Edit, only one record may be
selected, otherwise an error will occur: “One row must be
selected”.
Fig. II-110: IP Pool Group Configuration page
The Add Members page provides the following radio buttons:
IPaddress requires the member IP address that is to be added to
the group.
IP Subnet requires the subnet specified by the IP address and the
Maskbits. See above for more information about Maskbits.
The User-defined Group includes previously added groups that
also may be added as a member to another group.
Member description text fields can be used to enter an optional
description of the member.
Fig. II-111: IP Pool Group Configuration – Add Member
