QuadroE1/T1 Manual II: Administrator's Guide
About this Administrator's Guide
QuadroE1/T1; (SW Version 3.0.x)
4
About this Guide
The QuadroE1/T1 Manual is divided into two parts:
•
Manual-I: Installation Guide
gives step-by-step instructions to provision the Quadro and configure the phone extension with the Epygi SIP Server. After successfully
configuring the Quadro, a user will be able to make SIP phone calls to remote Quadro devices, make local calls to the PSTN and access the
Internet from devices connected to the LAN.
•
Manual-II: Administrator's Guide explains all QuadroE1/T1 management menus. It includes the available call codes and a list of all System
Default Values, too
H72H149HU
Quadro’s Graphical User Interface
UH
introduces the Quadro's graphical user interface and explains all recurrent buttons.
U
Administrator’s Graphical User Interface
U
explains each of the Administrator's management on the main page of the Quadro management.
150HU
Quadro’s Call Codes
U
describes the Quadro’s call codes that enable the user to navigate through Quadro’s services from a phone handset.
Quadro’s Auto Attendant Services
U
explains the operation of the Quadro's auto attendant and lists the call codes that may be used to enter the
auto attendant.
151HU
Appendix: System Default Settings
U
lists all factory defaults.
Appendix: Glossary
defines some technical terms.
Appendix: Software License Agreement
includes the terms and conditions of using the Quadro's hardware and software.
