Epson V11H833820, Руководство пользователя

Страница: 31 / 308

31
• When using a ceiling or portrait mount, use commercially available M6 screws (up to a depth of 1.06
inches [27 mm]) to attach the mount to the projector at these four points:
• When using a clamp to attach the projector to an aluminum truss, use commercially available M6
screws (up to a depth of 1.06 inches [27 mm]) to attach the clamp to at least four points on the
projector. You can use any of these points on the projector to accommodate the distance between the
screw holes and the center of the aluminum truss pipe.
Caution: Make sure to attach a commercially available drop-prevention wire that supports weights of at
least 220 lb (100 kg) to secure the projector to the mount to prevent it from falling. Make sure there is no
slack in the wire and that it is securely attached to the two connection points on the bottom of the
projector.