Epson TM-P20, Техническое справочное руководство

Страница: 56 / 100

56
NV graphics information print mode
Prints the following NV graphic information registered to the printers.

NV graphics capacity

NV graphics usage capacity

NV graphics free capacity

NV graphics registration

Key code for each data, number of X direction dots, number of Y direction dots

NV graphics data
Follow the steps below.
1
After running a self test, hold down the FEED button for at least one second, and then
select the Mode selection.
The Mode selection guidance is printed, and the Power LED flashes.
2
After briefly (less than one second) pressing the FEED button once, hold it down for
at least one second, to print the NV graphics information.
After information printing, the Mode selection guidance is printed again.
3
To finish, turn off the power, or select “Exit and Reboot Printer”.
Software settings mode
Set the printer's memory switch (customized value).
For details on NV graphics, see "NV Graphics Memory" on page 28 .

Print density

Automatic paper reduction

Interface selection

USB communications settings

Print speed

NV memory capacity

Command execution during offline

Transmission of status notice

Buzzer control

Automatic power off setting

Paper position immediately after specific state
For details on the memory switch (customized value), see "Software Settings" on page 47 .