Epson SureColor SC-T7000, Руководство пользователя

Страница: 51 / 163

Printable area
This section describes the printable areas for the printer.
If the margin set in an application is larger than the
following setting values, sections beyond the specified
margins are not printed. For example, if 15 mm is
selected for the left and right margins in the printer
menus and the document fills the page, the 15 mm at the
left and right sides of the page will not be printed.
Roll Paper Printable Area
The gray area in the illustration below shows the
printable area.
When printing borderless on the left and right, the left
and right margins are 0 mm. When printing borderless
on all edges, all margins are 0 mm.
The arrow in the illustration indicates the direction of
the ejected paper.
3~45mm
3mm/15mm
254mm~1118mm
254mm~914mm
254mm~620mm
127mm
~
15m
3mm/15mm 3mm/15mm
4
4
1
2
3
A
C
D
B
*1 SC-T7000 Series
*2 SC-T5000 Series
*3 SC-T3000 Series
*4 If
Banner is selected for Roll Paper Option in the
printer driver Advanced tab, the top and bottom
margins are 0 mm.
Margins for roll paper depend on the option selected for
Roll Paper Margin in the menus, as shown in the table
below.
Roll Paper Margin Settings
U
“Setup menu” on
page 107
indicates factory default settings.
Roll Paper Margin
Parameter Margin Values
Normal
A
,
C
= 15 mm
*
B
,
D
= 3 mm
Top15mm/Bottom15mm
A
,
C
= 15 mm
B
,
D
= 3 mm
Top35mm/Bottom15mm
A
= 35 mm
C
= 15 mm
B
,
D
= 3 mm
Top45mm/Bottom15mm
A
= 45 mm
C
= 15 mm
B
,
D
= 3 mm
3mm
A
,
B
,
C
,
D
= 3 mm
15mm
A
,
B
,
C
,
D
= 15 mm
* When Normal is selected, the value for
A
is 20 mm
for the following paper.
Premium Glossy Photo Paper (250)/Premium
Semigloss Photo Paper (250)/Premium Luster
Photo Paper (260)/Premium Semimatte Photo
Paper (260)
When the following media are used in CAD / Line
Drawing mode, the value for
A
and
C
is 3 mm.
Singleweight Matte Paper
c
Important:
❏
Printing is distorted when the trailing edge of
the roll paper comes off the core. Make sure the
trailing edge does not come inside the printing
area.
❏
The print size does not change even when the
margins are changed.
Cut Sheets Printable Area
When printing borderless on the left and right, the left
and right margins are 0 mm. (Borderless printing is not
available with poster board.)
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Basic Operations
51