Epson SureColor SC-T7000, Руководство пользователя

Страница: 35 / 163

Viewing and Changing
Media Settings
The following is displayed in the control panel after
paper is loaded.
Note:
If On is selected for Roll Paper Remaining and a barcode
with roll data is printed on the current roll, the printer
will read the barcode and adjust settings automatically,
and the above dialog will not be displayed.
Checking Media Settings
The dialog displays the following options for the paper
currently loaded in the printer.
Select Paper Type
The current paper type.
Remaining Setup
Displayed only with roll paper.
This item shows the option currently selected for Roll
Paper Remaining .
When On is selected for Roll Paper Remaining , the
printer tracks the following roll paper data.
❏
Time until replacement
The following settings are recorded in a barcode
printed on the roll.
The amount of paper remaining, the value selected
for remaining alert, and the paper type.
The barcode is automatically printed at the end of
the roll when the roll is rewound. The barcode is
automatically read and settings adjusted the next
time the paper is used, improving efficiency when
multiple rolls of paper are used.
❏
Tracking the amount of paper remaining in the
.
tab info display area
The info display area shows the amount of paper
remaining in the current roll. Once the amount of
paper remaining falls below the limit, the amount is
replaced by a warning indicator showing that paper
is running low.
U
“Screen View” on page 13
❏
Printing availability
The printer predicts whether the current job can be
printed on the amount of paper remaining and
displays the results, preventing waste caused the
paper running out part way through a print job.
This allows you to choose whether to print on the
existing roll or replace the paper, preventing waste.
Adjusting Settings
Follow the steps below to change the settings displayed.
Buttons that are used in the following settings
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Basic Operations
35