Epson SureColor SC-T7000, Руководство пользователя

Страница: 107 / 163

Item Description
Restore
Settings Yes Restore the selected custom paper settings to
default values.
No
Print Paper List
Press the
Z
button to print a list of custom paper settings.
Maintenance menu
Item Description
Nozzle Check
Press the
Z
button to print a nozzle check pattern. Visually inspect
the printed pattern and perform head cleaning if you notice faint or
missing areas.
U
“Checking for clogged nozzles” on page 114
Head Cleaning
Inspect the printed pattern and select the check boxes for patterns
with faint or missing areas. To select all nozzles, place a check in the
box on the left.
U
“Cleaning the print head” on page 115
Head Alignment Auto(Uni-D) If print results are grainy or out of focus, perform head alignment to
realign the print head. If
Auto is selected, the printer will scan the
printed pattern during printing and realign the head automatically.
If Manual is selected, a pattern will be printed; inspect the pattern
visually and enter the value you think appropriate.
U
“Minimizing Print Misalignments (Head Alignment)” on
page 116
Auto(Bi-D)
Manual(Uni-D)
Manual(Bi-D)
Cutter Maintenance Adjust Cut Position -3 to 3 mm You can fine tune the cut position when printing to
roll paper with no margins in all directions. The cut
position can be adjusted in increments of 0.2 mm.
Replace Cutter Moves the cutter to the replacement position so it can be replaced.
Press the
Z
button to move the cutter to the replacement position.
The paper must be removed before the cutter can be replaced. Re-
move the paper before proceeding.
U
“Replacing the Cutter” on
page 121
Setup menu
Selecting Administrator Menu displays a password prompt. No password is entered at shipment; press the
Z
button
to proceed. If the administrator password has been changed, enter the administrator password.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Using the Control Panel Menu
107