Epson SureColor F6370 Скачать руководство пользователя страница 64

Страница: 64 / 135

Soft cloth

Obtain a commercially available static-free, lint-free soft cloth to clean inside the product.

Parent topic:

Preparing for Maintenance

Related references

Consumables and Replacement Parts

Maintenance Precautions

Follow these precautions as you maintain your product:

• Remove loaded media from the product before performing any maintenance tasks.

• Touch a metal object to discharge any static electricity before performing any maintenance tasks.

• Never touch the belts, cables, circuit boards, or other parts not covered in the maintenance task steps

or you could adversely affect the print quality or damage your product.

• Use only the cleaning sticks included in the product maintenance kit to clean your product to avoid

damaging the print head.

• Do not reuse cleaning sticks.

• Do not touch the ends of the cleaning sticks to prevent oil from your hands from damaging the print

head.

• Use only the cap cleaning liquid specified to clean the caps. Using anything else could damage your

product or reduce print quality.

• Do not use alcohol or water to clean the nozzle surface, caps, or wiper or you may damage your

product.

• Store ink packs, waste ink, and ink cleaner out of the reach of children.

• Wear protective eyewear, gloves, and a mask when performing maintenance tasks.

• Wash your hands after performing maintenance.

• Always use fresh cleaning pads.

Warning:

If ink, waste ink or ink cleaner contact your skin, or get into your eyes or mouth, immediately

do the following:

• Thoroughly wash the substance from your skin with large volumes of soapy water. If your skin

becomes irritated or discolored, contact a doctor.

• Immediately rinse the substance from your eyes with water to avoid bloodshot eyes or mild

inflammation. If you experience eye problems, contact a doctor.

Содержание SureColor F6370








































































































































Результаты поиска

Содержание SureColor F6370

Отзывы:

Похожие инструкции для SureColor F6370

Бренды по названию

Популярные бренды

Epson SureColor F6370, Руководство пользователя

Результаты поиска

Содержание SureColor F6370

Отзывы:

Похожие инструкции для SureColor F6370

Бренды по названию

Популярные бренды