Epson Stylus Pro 7600 Photographic Dye Ink, Справочное руководство

Страница: 73 / 295

72
* smallest gap
7. After printing, the pattern number and current set number
are displayed. Select the set that has the smallest gaps, then
press
Paper Feed (
u
) or Paper Feed (
d
) button to display
the number for that set.
8. Press the Enter button to register the set number. The next
pattern number appears. Then repeat step 7.
Note:
❏
If you want to change the set registered number, press the
Paper Source (
l
), Paper Feed (
u
) or Paper Feed (
d
)
button to select a new pattern number, then SelecType (
r
)
button. The current set number is displayed on the LCD panel.
Press the
Paper Feed (
u
) or Paper Feed (
d
) button to
select the number, then the Enter button.
❏
To return to Step 5, press Paper Source (
l
) twice.
9. After you set the pattern(s), press the Pause button to return
to the READY status.
Setting the paper thickness
When you use media other than EPSON special media, you may
need to set the paper thickness. You can select whether the
thickness of the paper you are using is determined automatically
(
STD (standard)) or by the registered value ( 1 to 10 ) in the Paper
Settings menu. To register and recall the settings you made, see
the following sections. You can also register the ink drying time
for respective paper settings including
STD . To select the
registered setting, see “Selecting the registered settings”.
Registering the settings
To register the paper thickness and ink drying time settings,
follow the steps below.