Epson Stylus Pro 7600 Photographic Dye Ink, Справочное руководство

Страница: 12 / 295

11
❏
If you use an extension cord with the printer, make sure the
total ampere rating of the devices plugged into the extension
cord does not exceed the cord’s ampere rating. Also, make
sure the total ampere rating of all devices plugged into the
wall outlet does not exceed the wall outlet’s ampere rating.
❏
Do not attempt to service the printer yourself.
❏
Unplug the printer and refer servicing to qualified service
personnel under the following conditions:
The power cord or plug is damaged; liquid has entered the
printer; the printer has been dropped or the cabinet damaged;
the printer does not operate normally or exhibits a distinct
change in performance.
❏
The interface connectors (including Type B interface card) and
the connector for optional Auto Take-up Reel Unit are
Non-LPS (non-limited power source).
❏
If you plan to use the printer in Germany, observe the
following:
To provide adequate short-circuit protection and
over-current protection for this printer, the building
installation must be protected by a 10 or 16 amp circuit
breaker.
A Few Precautions
When choosing a place for the printer
❏
Place the printer on a flat, stable surface that is larger than the
printer. The printer will not operate properly if it is tilted or
at an angle.