249
❏
Delete unnecessary files to make room on your hard disk
drive.
Note:
Your computer may not have enough memory. For further tips, see
“Increasing the Print Speed”.
Roll Paper Cannot be Cut
Try one or more of these solutions:
❏
Make sure that the
Roll Auto Cut
light is on. Press the
Paper
Source
button if necessary. Then press the
Cut/Eject
button.
The printer cuts the roll paper.
❏
Cut the roll paper by hand if necessary. Check that the paper
thickness of the roll paper loaded in the printer matches the
paper specification (see “Paper”). If so, the paper cutter may
be blunt and require replacement as described in “Replacing
the Paper Cutter”.
Note:
If you use roll paper other than EPSON special media, see the user
documentation included with the paper, or contact your supplier.
Paper Feed or Paper Jam Problems Occur
Frequently
Try one or more of these solutions:
❏
Secure the roll paper you are not using with the roll paper belt
when two roll paper spindles are installed. See “Using the roll
paper belt”.
Содержание Stylus Pro 7600 Photographic Dye Ink
Страница 1: ...Reference Guide ...
Страница 58: ...57 How to enter the SelecType mode The following shows the basic SelecType setting procedure ...
Страница 121: ...120 2 Right click your printer icon and select Properties 3 Click the Port tab then click the Configure Port button ...
Страница 218: ...217 for Stylus Pro 9600 for Stylus Pro 7600 7 Move the printer horizontally ...